Modified Sine Wave Power Inverters represent the most economical solution for powering a large number of appliances. The waveform produced by a Modified Sine Wave Power Inverter is “blocky” resembling a set of steps whereas the waveform produced by utility companies is smooth much like a curvy road.
Features- 2500W max continuous power
- Modified sine wave
- Volt meter on front panel to monitor your battery voltage
- Watt meter on front panel
- LED indicator green/red that monitors ready/fault
- Isolated ground neutral
- Dual ac receptacle with protective rubber covers
- On/off switch
- Over Temperature protection
- Over Load protection
- Dual cooling fan operation
- Internally fuse protected
- ac output short circuit protection
- Auto reset on most fault conditions
- Aluminum case for optimal cooling
- Pre-wired for remote on/off switch
- Pre-slotted mounting plate
Specification- Continuous output power: 2500 Watts. Use our 150 amp inline fuse.
- Surge power capability (peak power): 5000 Watts
- dc input / operating voltage: 20 to 30 Volts
- Output voltage: 120 Volts ac +/- 10%
- Output wave form: modified sine wave with phase correction
- Output frequency: 60 Hz +/- 1 Hz
- Battery low voltage shutdown: 20.0 +/- 0.5 V
- No load current: < 0.6 Amps
- DC amps: 104
- AC amps: 21
- Full load efficiency: 90%
- 1/3 load efficiency: 95%
- No load minimum operating temperature: -15 degrees Celsius
- Full load maximum operating temperature: 55 +/- 5 degrees Celsius (automatic shutdown)
- AC Output Socket Type: dual Type 2 -3 prong
- High input voltage protection: 30V-34V
- Low input voltage shutdown: 20V
- Internal fuse protection
