The AIMS 5000 Watt 24 volt modified sine wave power inverter provides ample power to run all devices continuously which are rated at 5000 watts or less. With a peak of 10,000 watts, the 5,000 watt power inverter will fit many applications.
Features- 5000W max continuous power.
- Modified sine wave.
- Volt meter on front panel to monitor your battery voltage.
- Amp meter on front panel to monitor your current use.
- AC Direct Connect Terminal.
- Over Temperature LED indicator.
- Over Load LED indicator.
- Quadruple ac receptacle that can be used with any separate splitter to provide even more outlets.
- On/off switch.
- Over Temperature protection.
- Over Load protection.
- Single cooling fan operation thermally controlled.
- Internally fuse protected.
- AC output short circuit protection.
- Auto reset on most fault conditions.
- Aluminum case for optimal cooling.
- Pre-wired for remote on/off switch.
- Pre-slotted mounting plate.
Specification- Surge power capability (peak power): 10,000 Watts.
- DC input / operating voltage: 34 to 20 Volts.
- Output voltage: 120 Volts ac +/- 10%.
- Output wave form: modified sine wave with phase correction.
- Output frequency: 60 Hz +/- 1 Hz.
- Battery low voltage alarm: 21.0 +/- 0.5 Volts.
- Battery low voltage shutdown: 20.0 +/- 0.5 Volts.
- No load current @ 24V: < 0.4 Amps.
- Full load efficiency: 90%.
- 1/3 load efficiency: 95%.
- No load minimum operating temperature: -15 degrees Celsius.
- Full load maximum operating temperature: 55 +/- 5 degrees Celsius (automatic shutdown).
- AC output Socket Type: quadruple Type 2 -3 prong.
- High input voltage protection: 34.5V.
- Low input voltage shutdown: 20.0V.
- Dimension - 17.5 x 6 x 8 in.
- Item Weight - 18 lbs.
