Introducing the Ashly series of nX, nXe, or nXp power amplifiers. These products use state of the art, light weight, high power, high efficiency switching technology developed through years of design and field testing. nX amplifiers are three series, designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers as well as schools, store fronts,and worship spaces. as three separate amplifier series, NX offers 2 or 4-channel models as NX (base model series), NXE (networkable), or NXP (networkable + DSP).Ethernet Control using ProteaNE software.Also, serial data control by Ashly programmable remotes or third party controllers, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, optional Dante&trade, CobraNettrade, or AES3 digital audio capability (factory-installed).Real-Time Clock with Event Scheduler.
Assign automatic execution of selected functions and tasks. The event scheduler is programmed using PneS software and stored in the amplifier.Ashly Remote Control via iPad app.Use our Ashly Remote app for custom design of secure wireless control over a network.Class-D Switching Amplifier Technology.NXE features a switch-mode power supply which automatically detects 120VAC or 240VAC operation and makes NXE one of the lightest in its class.Multi-Mode Operation.Selectable Outputs on each channel allow you to choose the desired output mode. Set the DIP-switch configuration for Low Impedance (2, 4, and 8 Ohm), or Constant Voltage (70V or 100V) and you’re set to go.Energy Efficiency.NXE has power-saving Ashly EMS (Energy Management System) which provides an automatic sleep-mode drawing less than 1 Watt (defeatable).Multiple Internal Power Supplies.NXE provides increased channel separation and reliability.Please Note: All Ashly nX, nXe & nXp amps include the appropriate power cable that corresponds with the amps power connector.
Features- Selectable 80Hz Hipass filter, limiter, and input gain per channel, via rear panel
- Remote DC level control per channel
- Extensive protection circuitry, continuously variable cooling fans
- Ethernet port for software control and monitoring of amplifier functions, with front panel COM activity LED
- Serial data port for Ashly WR-5 and RD-8C programmable remote control (optional RS-232 converter INA-1 for third party controllers)
- Instant Standby Mode, 30% reduction in idle power consumption, triggered by contact closure, software control, or event scheduler
- Preset recall via contact closure, software control, remote control, or event scheduler
- Programmable power-on delay
- Aux preamp line outputs for driving other amplifiers
- Fault condition logic outputs, per channel
- Neutrik Combo XLR - 1/4 TRS jack plus Euroblock input connectors
- Neutrik speakON twist locking loudspeaker connectors
Specifications- Voltage Gain: Selectable at 26dB, 32dB, 38dB, or 1.4V
- Input High Pass Filter: 80Hz 2nd order
- Channel Separation: -75dB (dB from full output, 1kHz)
- Signal-to-Noise (20Hz-20kHz, unweighted): >114dB (all 3.0x models), >111dB (all 1.5x models), >108dB (all 800x models), >105dB (all 400x models)
- Frequency Response: 20Hz-20kHz, +/-0.05dB
- Balanced Input Connector: Euroblock 3.5mm, ¼ TRS and XLR Combo jack
- Input Impedance: 10k Ohms
- Maximum Input Level: +21dBu
- Speaker Output Connector: Neutrik speakON
- Control Network: Compatible w/ standard 100MB Ethernet
- AUX Output Connector: Balanced Euroblock 3.5mm
- AUX Output Maximum Level: +21dBu
- Remote Standby Contact Closure: Euroblock 3.5mm, close contact to GND for standby mode
- Preset Recall Contact Closure: Euroblock 3.5mm, close contact to GND for preset 1-4 recall
- Data Connection: Euroblock 3.5mm - Gnd, +18V, In, Out
- Fault Condition Logic Outputs: Fault indicated by loss of 1Hz "heartbeat" pulse signal
- Remote DC Level Control: Euroblock 3.5mm - Gnd, CV, V+ per input
- Cooling: Continuously variable temperature controlled axial fan(s)
- Environmental: 32-113 deg F, (0-45 deg, C) (noncondensing)
- Unit Dimensions (all models): 19 W x 3.5 H x 16.84 D (483mm x 89mm x 428mm)
- Operating Range: 70-135VAC 140-270VAC
- Power Cable Connector Requirements: 20A powerCON (Cable Included)
Weight: 22.7 lbs
