The MUX-22 Series is a group of fiber interfaces that distributes multiple professional video and audio signals, such as SD/HD/3G-SDI over the same optical fiber.The MUX-22 Series panels offer eight SD/HD/3G-SDI coaxial video inputs or outputs that are converted to and from single-mode optical fiber links. It is equipped with a CWDM (Coarse Wavelength Division Multiplexing) module with auxiliary fiber ports to allow for connection of external fiber systems, to the CWDM module.The ProGrid audio and data transport seamlessly multiplexes with the MUX-22 Series fiber. Audio and control data from Clear-Com user panels or matrices are sent transparently through the optical network. Each intercom channel can be routed to and from every device on the network using the Optocore Control software. The devices can also be used with other BroaMan units as part of a larger routing solution.The MUX-22-RTS-8IN is a 1RU single point to point BroaMan Intercom and Video interface with two SANE CAT5 network ports and Optocore Single-Mode LC Fiber interface, and includes 4 RTS RS485 intercom channels, 8 3G-SDI video inputs GPIO Option card. A separate sync i/o, 2 LAN ports and 1 Auxiliary 1310nm fiber tunnel are . Redundant PSUs are included. At least two BroaMan MUX interfaces are required for an end to end link.
Features- Seamless transport of audio, video, intercom, and control data
- Full integration into SANE, DiViNe and Optocore network
- SD/HD/3G-SDI capacity 8 SD/HD/3G-SDI ports; 4 simplex LC fiber ports
- CWDM module
- Tri/Bi-level video clock input and output module
- Optocore module: 2 x Optocore 2Gbps ports; 2 x SANE/LAN ports; 2 x LAN ports; 4 x RS485/422 ports; Word Clock I/O
- Redundant power supplies
- Full control with ProGrid control software
- LAN, USB and RS232 ports for configuration
- Upgradeable internal logic
- Comprehensive front panel status indicators
Specifications- Connection: Duplex LC
- Protocol: Optocore
- Transmission: Full Duplex
- Audio: TIA - 568A/B, Optocore; 200 Mbit/s
- Convention: EIA / TIA-485
- Data Channels: Digital control data; 4
- Termination: 330
- Standards: SD, ED, HD, Dual Link, 3G
- Complies With Smpte: 259M, 292M, 344M, 372M, 424M
- Hardware Standard: BNC - 75
- Data Rate: Dependent on sample rate; Up to 192 kHz
- Impedance: Output 5, Input 75
- Drive Level: Output 1 Vpp
- Zero Level: Referring to GND; +1.7 V
- Rs232: EIA / TIA - 232; 57 600 Baud
- Usb: USB 2.0 - Device; 12 Mbit/s
- Power Supply Type: Switch-mode, universal input
- Main Voltage: 100-240 V; 50-60 Hz
- Frequency: 50-60 Hz
- Dimension: 1.73" x 19" x 8.87"
