4 Channel x 75 watts Network Audio Power Amplifier with Ethernet
Introducing the Ashly series of nX, nXe, or nXp power amplifiers. These products use state of the art, light weight, high power, high efficiency switching technology developed through years of design and field testing. nX amplifiers are obtainable in three series, designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers as well as schools, store fronts, and worship spaces. Class-D Switching Amplifier Technology. NXE features a universal switch-mode power supply with Power Factor Correction (PFC) that operates from 70VAC to 270VAC.
Multi-Mode Operation, Selectable Outputs allow you to choose the desired output mode on each channel. Set the DIP-switch configuration for Low Impedance (2, 4, and 8 Ohm), or 25V, 70V, or 100V Constant Voltage and you’re set to go. Energy Efficiency. NXP has power-saving Ashly EMS (Energy Management System) which provides an automatic sleep-mode drawing less than 1 Watt (defeatable). Ethernet Control using Protea NE software. Also, serial data control by Ashly programmable remotes or third party controllers, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, optional Dante, CobraNet, or AES3 digital audio capability (factory-installed). Real-Time Clock with Event Scheduler. Assign automatic execution of selected functions and tasks. The event scheduler is programmed from software and stored in the amplifier.
Features- Selectable 80Hz 2nd-order Hi-pass filter, limiter and input gain per channel
- Remote DC level control per channel
- Extensive protection circuitry, continuously variable cooling fan
- Ethernet port for software control and monitoring of amplifier functions, with front panel COM activity LED
- Instant Standby Mode, 40% reduction in idle power consumption
- Preset recall via contact closure, software control, remote control, or event scheduler
- Triggered by contact closure, software control, or event scheduler
- Programmable power-on delay
- Aux preamp line outputs for driving other amplifiers
- Fault condition logic outputs per channel
- Euroblock input connectors
- Euroblock loudspeaker connectors
Specifications- Voltage Gain: Selectable at 26dB, 32dB, 38dB, or 1.4V
- Input High Pass Filter: 80Hz 2nd order
- Channel Separation: -75dB (dB from full output, 1kHz)
- Frequency Response: 20Hz-20kHz, +/-0.05dB
- Balanced Input Connector: Euroblock 3.5 mm
- Input Impedance: 10k Ohms
- Weight: 14. 2 lbs
