Clear-Com CLCM-FSIIBASEII5 FS II FreeSpeak II Base Station with XLR-5F Headset Connector - Up to 5 Beltpacks & 10 Antennas

The Clear-Com FSII-BASE-II is a base station for the wireless FreeSpeak II 1.9 GHz and 2.4 GHz active transceiver antennas and beltpacks. The FSII-BASE-II has four 2-wire connections for analog partyline connection, four 4-wire audio connections and four displays with soft keys. Dedicated stage announce (SA) output and program audio input are provided. OperationA single base station can operate using a mix of both 1.9GHz and 2.4GHz FreeSpeak II active antenna transceivers to support up to 25 1.9 GHz and/or 2.4GHz beltpacks and 10 active transceiver antennas via two transceiver splitters (FSII-SPL). The user interface supports system configuration and system monitors along with a main station mode with Talk and Call soft keys. A dedicated headset jack is included for communications and monitoring from the front panel. Access to channels and other functions are assignable through the menu on the base station or through the Core Configuration Manager (CCM) browser-based tool.

• Routing and configuration of up to 25 FSII beltpacks
• Browser-based configuration tool
• Four 2-wire ports with call signal, auto-nulling
• Four 4-wire ports with call signal
• One dry contact relays
• Multi-mode user interface with monitoring, setup and main station modes with assignable soft keys
• Dedicated front panel keys for remote mic kill, stage announce and all talk
• Supports both 1.9GHz and 2.4GHz FSII beltpacks on a single base station
• Matrix and partyline configurations support up to 12 channels and/or groups

• No. of Beltpacks per Base Station: 25
• No. of Transceiver/ Antennas Supported by Base: 10
• No. of Active Transceiver Ports: 2, one port can remotely power up to 1 FSII splitter or 1 FSII transceiver
• PC Programming Port: 2 LAN RJ45
• Relay Port: DB15, supports one relay assigned to the SA out
• Partyline A ,B,C,D (each): XLR-3F, on/off termination switch, Clear-Com and RTS compatible
• Partyline Power On/Off: A/B, C/D paired
• Partyline Output Voltage: 26 - 28VDC, 850mA per pair (A/B or C/D)
• Four-Wire/Matrix Connection: 4 RJ-45
• Program Input: XLR-3F, transformer isolated, line-level input
• Stage Announce Output: XLR-3M, transformer isolated, line-level output
• Front Panel Headset: 4-pin male and 5-pin female options
• Front Panel Displays: 4 OLED's with encoders and assignable soft keys
• Front Panel Indicators: Antenna Status, Beltpack Status
• External Power Supply Connection: 12VDC
• Weight: 5 lbs