The CATX Display Port Computer Access Modules are highly compact devices that allow you to extend your DisplayPort equipped computer over CATX cable up to 300 meters. The CAM connects to the DisplayPort video connector plus USB and Audio ports on your computer and then connects via CAT 5, 5e or 6 cabling to the Adder View CATx KVM switches and/or Adder extender receivers either Adder Link X100 or X200, each of which can be located up to 300 meters from the module. Your video display, keyboard, mice and speakers are then all linked to the remote device.
Features- The CATX DisplayPort CAM uses the USB port to derive its power from the host computer
- The module will check during power up the EDID information from the KVM switch or extender that is connected to the monitor and passes this back to the computer
- The CAM supports low speed (1Mb/s) HID USB devices only
- Audio: 2 channel CD Quality audio is supported via a 3.5 mm jack plug
Specifications- Maximum Video Resolution: 1920 x 1200
- Extension Distance: - 1920 x 1200 x 60Hz at 200m
- Power: 5V
- Operating temperature: 0C to 40 / 32F to 104F
- Weight: 0.2 lbs