Adder ADR-ALIF101T-DP High Performance ZeroU IP KVM Dongle - Extension or Matrix of Video, Audio & USB Over Single Cable

Use this utility when configuring the ALIF101T to work with ALIF receivers which are linked via a network. You will need to use a computer connected to the same network as the ALIF101T unit (you can also connect them directly).

The ADDER ALIF101T-DP is a High Performance ZeroU™ IP KVM dongle for extension or matrix of video, audio and USB over a single cable.

• DisplayPort or HDMI connector input
• Cable tie mounting slot
• Status indicators
• Optional external power input
• Ethernet port (plus indicators) - Either link directly to an ALIF receiver or via a network switch
• Reset button
• Red USB plug provides power only when the external power adapter is not present
• Black USB plug provides USB signals (plus power if the external power adapter is not present)

• Storage temperature: -10 to 60degC/140degF
• Storage and operating relative humidity: 10-90% non-condensing
• MTBF: >500,000 hours
• USB power: 2x USB2.0 (2x 500mA @5V) 5W
• External power: 5VDC, 1A, (LPS)
• Typical power consumption: 3W
• BTU: 10.2BTU/hr
• Dimension: (L)110mm/4.3" x (W)55mm/2.17" x (D)25mm/1" with 30cm/11.8" cable length
• Weight Capacity: 0.2kg/0.4lb
• Materials: ABS and aluminium construction
• Computer: 1x DisplayPort 2x USB Type-A
• Ethernet: 1x 8p8c (RJ45)
• Power: 2.5mm socket
• USB features: Keyboard, mouse, touch and hard drives
• USB device seen as: 7 or 13 port hub
• Max video resolution: Up to 2560x1600 @60Hz
• Audio: Bi-directional USB audio 2 channel 16bit 48KHz
• DisplayPortT Audio: 2 channel linear PCM
• Ethernet: 1GbE (No 10/100 support)
• Weight: 1 lbs