Apantac APA-KVM-IP-RX KVM Receiver over IP with USB Mouse & Keyboard over Gigabit Ethernet LAN

Apantac KVM-IP-Rx is a MT Hood KVM receiver extender that is based on standard Gigabit Ethernet Technology.

• Supports up to 170 meters point to point with CAT6 cables
• Supports up to 100 meters when using with a GigE Switch
• Supports HDMI, DVI or analog VGA (slide switch) input and output signals
• Supports point-to-point (Unicast), one-to-many (Multicast) for Audio/Video distribution
• Supports KVM extension/switching connected via USB
• Receiver unit has 4 USB ports to easily extend peripherals such as flash drives, keyboard and mouse
• Supports data transfer (USB attached drives) from Rx to Tx
• Supports USB touch screen extension
• Supports bi-directional stereo audio (Example, speakers or microphones on the Rx)
• Supports IR transmission (Rx to Tx) (Example, IR remote control at Rx to control the DVD player or set-top box connected to Tx)
• Supports RS-232 communication between Tx and Rx
• Built-in webpage for basic configuration (setting of IP address, device name, Multi/Unicast, Baud Rate and etc)
• Connection Manager Software for Tx/Rx management
• Supports resolution up to 1920x1080 (HDMI/VGA) / 1920X1200 (DVI)
• EDID Copy function
• Built-ion scaler function
• LED status indicators
• Plug-and-play

• Microphone Input: 3.5mm Stereo Phone Jack
• USB: 4x USB Type A (Female)
• System LinkInput: RJ45
• RS-232 Baud Rate: 3-pin Phoenix connector up to 115,200 bps, full duplex
• Video Resolution: HDMI
• Interconnect Cable: Standard CAT6/CAT6a/CAT7 network cable
• Maximum Cable Length: 170m point-to-point, 100m when connected to a switch
• Operating Temperature: 32deg to 122degF (0deg to 50degC)
• Storage Temperature: -4deg to 185degF (-20deg to 85degC)
• Environmental Humidity: 0 to 80% (non-condensing)
• Power: DC 12V, 1.5A. Consumption 400 mA
• Weight Capacity: 1.3Lbs (600g)
• Dimension: 6.04 x 3.47 x 1.24" (153.4 x 88.2 x 31.5mm)
• Weight: 1.2 lbs