Radio jocks love loud headphones. Maybe they expect to hear everything with the phones around their necks. Maybe they want to watch the cans jumping to the beat. No matter the reasons, the Headphone Gizmo will give them all the volume they crave. And if your talent prefers to hear all the detail and nuance in their headphones, the precision analog circuitry in the Headphone Gizmo is as transparent as it is loud.
Headphone Gizmos mount to the underside of your counter to save desktop space, always right where they're needed and never in the way. The low-profile design has contoured edges to prevent painful knee incursions. Both 1/4 inch and 1/8 inch jacks are provided. Whether your talent uses full coverage phones or modern IEMs, the Headphone Gizmo will drive them to perfection.
Feed the Headphone Gizmo stereo audio via its RJ-45 input connector (StudioHub+ format) from your node or blade output. A convenient daisy-chain output passes the signal along to the next device. Power the Headphone Gizmo from a StudioHub+ power supply inserter or the included wall adapter.
Specifications- Audio Input & Output: RJ45 jack, StudioHub+ format
- Headphone Outputs: 1/8" (3.5mm) and 1/4" (6.3mm) TRS
- Power: 16VAC (115V or 230V) via wall adapter or +/-15VDC via RJ45 audio input jack
- Nominal Input Level: +4dBu
- Maximum Input Level: +26dBu
- Input Impedance: 20k Ohm Fully Balanced
- Headphone Impedance: 16 Ohm
- Output Voltage: +20dBu
- Output Power: 2.6W per channel at 16
- Output Current: 400mA
- Frequency Response: 20Hz - 20kHz ±0.1dB
- THD+N: 0.003% (20Hz - 20kHz)
- Dynamic Range: 115dB
- CMRR: 80dB (1kHz)
- Power Input (120V Adapter): 120VAC 60Hz
- Power Input (230V Adapter): 230VAC 50Hz
- Power Output (Adapter): 16VAC, 500mA, 8.0W
- Operating Temperature: 32° to 104° F
- Storage Temperature: -4° to 113° F
- Relative Humidity: 0% to 90% non-condensing
- Weight: 3 lbs
