A Family of Brands
unbeatablesale
boncui
playingkitchen
funtoymall
halloween mall
petshopusa
toolschest
weddingandpartymall
allgourmetfood
collectablesmall
gadgetsandpresents
housedecormall
procurnow
stylish apparel
technooutlet
comfortmarket
greatermedical
jewelryshope
lighting-decor
travelbag
rewardsmalls
sportsrecreationmall

Schneider Electric APC-AP8870 NetShelter Verticle Metered Rack PDU 2G with Locking IEC - 30A 100-120-200-240V - 16 x 5-20R - 12 x C13 - 2 x C19 Out

MSRP: $1,395.62
$1,073.55
Availability: In stock
SKU: TCNCD423706

The APC AP8870 is a NetShelter Series Rack PDU. It's 2G Metered, ZeroU, 30A and ranges from 100-120/200-240V. It has 16 5-20R outlets, 12 C13 outlets and 2 C19 Power Outlets. APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency. This APC Metered Rack Power Distribution Unit (PDU) may be used as a stand-alone, networkmanageable power distribution device or up to four devices can be connected together using one network connection. The Rack PDU provides real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads.

Features
  • Best-in-class intelligent rack power distribution!
  • Superior quality performance and reliability
  • Device power, peak power, apparent power, power factor and energy monitoring
  • Phase voltage, current, peak current, power, apparent power and power factor monitoring
  • Bank current and peak current monitoring (for models that support breaker banks)
  • Configurable alarm thresholds that provide network and visual alarms to help avoid overloaded circuits
  • Email notifications for Rack PDU and Network Management Card (NMC) system events
  • Security protocols for authentication and encryption
  • 1x AP8870 Rack PDU 70.51 in/179.1 cm
  • 1x Installation guide
  • 1x Rack Mounting brackets
  • 1x Serial configuration cable
Specifications
  • Color: Black
  • PDU Type: Metered
  • Other Output Voltage: 240 V
  • Cable Length: 9.84 ft (3.00 m)
  • Number Of Cables: 1
  • Main Input Voltage: 120 V-208 V
  • Height: 70.51 in (179.1 cm)
  • Width: 2.17 in (5.5 cm)
  • Main Output Voltage: 120 V
  • Depth: 1.73 in (4.4 cm)
  • Mounting Location: Side
  • Input Connection: Type NEMA L14-30P
  • Mounting Mode: Not rack-mountable
  • Mounting Position: Vertical
  • Line Rated Current: 24 A
  • Load Capacity: 4992 VA
  • Input Frequency: 50/60 Hz
  • Number of power socket outlets 16 NEMA 5-20R-12 IEC 60320 C13-2 IEC 60320 C19
  • Ambient Air Temperature for Operation: 23.140 deg F (-5.60 deg C)
  • Relative Humidity: 5.95 %
  • Ambient Air Temperature for Storage: -13.149 deg F (-25.65 deg C)
  • Storage Relative Humidity 5.95 %
  • Storage altitude: 0.50000 ft (0.00.15240.00 m)
  • Weight: 14.07 lbs
Products specifications
Attribute nameAttribute value
MPNAPC-AP8870