The Lowell ACSPR-SEQ6-2009 features Advanced Surge Protection to protect against power surges/spikes up to 72,000A. The panel features a four-step sequencer plus two-remote steps. Though the panel has a 20A rating it features NEMA 5-15R receptacles. Six receptacles are controlled by the front switch, which begins a delayed start (or shut down) of steps one through four as well as any RPC units connected to the rear output terminal block (steps five and six). The unit can also be controlled remotely by connecting an external switch or alarm system to the rear terminal blocks.
Rear termination blocks accommodate remote switches, external triggers and an alarm system interface for use where mandated by fire code.
Features- Color coded LED status indicators
- Advanced surge protection to 72,000A
- Four-step sequencer has a delay between steps that can be set between 0.5 and 10 seconds (screwdriver adjustable)
- Two dry contact closures (steps 5 and 6) trigger remote power control units
- 1x 20A Power Panel
- 6x Switched Outlets (15A)
- 3x Unswitched Outlets (15A)
- 1x 4-Step and 2-Remote Seq
- 1x Surge Supp, Cord, 1U
Specifications- Power Rating: 120VAC 60Hz, 20A
- Outlets: 9 (15A) outlets 1 front (un-switched), 2 rear (un-switched), 6 rear (switched)
- Alarm Interface: Lock on, lock off and switch lock functions for alarm system or master control panel applications.
- Chassis: 19 in. x 9 in. x 1.75 in. (1U)
- Termination: 9 ft. attached cord with NEMA 5-20P plug
- Weight: 11 lbs